Home automation · Iddero

Iddero KNX touch panels

We install and program the KNX displays and servers of Iddero, a manufacturer based in Málaga: from a small touch thermostat per room to a 10-inch panel acting as control centre and door intercom monitor.

In short

Domotica Valencia installs Iddero’s KNX range: 3.5-inch VERSO Q displays, 4.3-inch VERSO 2 and VERSO+IP 2, VERSO INDOOR with door intercom, 7-inch HC3 and 10.1-inch HC3L panels with IP and door intercom, the Home Server 3 for controlling the home from a phone, and Alexa voice control. We configure them on any KNX installation.

Who it is for

  • Homes with KNX automation
  • Hotels and holiday apartments
  • Offices and meeting rooms
  • Existing KNX installations wanting a display

What is included

01

Room control

VERSO displays for climate, lights, blinds and scenes in each room.

02

Central panel

HC3 or HC3L with the whole home on a large screen.

03

Door intercom

IP displays act as indoor monitor for compatible IP door stations.

04

Phone control

Home Server 3 to run the home from a smartphone or tablet.

05

Voice

Alexa voice control of KNX devices.

06

Programming

ETS configuration, custom pages and training.

Iddero range

Iddero KNX displays and servers
DeviceDisplayWhat it is for
VERSO Q3.5" capacitiveCompact thermostat and room control.
VERSO 24.3" capacitiveRoom control with more on-screen functions.
VERSO+IP 24.3" capacitive with IPRoom control with network connection.
VERSO INDOOR4.3" IPS with IPRoom control and door intercom monitor.
HC3-KNX7" capacitive with IPCentral panel with door intercom.
HC3L-KNX10.1" IPS with IPLarge central panel with door intercom.
Home Server 3No displayCompact server to control KNX from a smartphone or tablet.
Voice ControlNo displayAlexa voice control.

Why we choose Iddero in many projects

  • They are standard KNX devices: they work with push-buttons and actuators from any KNX manufacturer, such as JUNG.
  • Several screen sizes to fit the right one in each room.
  • IP displays integrate the door intercom, so no separate monitor is needed.
  • Spanish manufacturer, with documentation and support in Spanish.

How we work

  • We define what each display controls and how pages are organised.
  • We install in a switch box or surface-mounted, depending on the model.
  • We program with ETS, adjust the interface design and test with you.
  • We set up the door intercom, remote access and voice if included.

Frequently asked questions

Can I add an Iddero display to my existing KNX installation?

Yes. It joins the KNX bus and is programmed with ETS alongside the rest of the installation. We need the existing ETS project or to rebuild it.

Which door intercoms are compatible?

IP displays work as indoor monitors for compatible IP door stations. We check the specific model’s compatibility before installing.

Which display goes where?

Typically a VERSO in bedrooms and rooms, and an HC3 or HC3L at the entrance or living room as the central panel. Our KNX display guide explains it.

Contact

Shall we talk about your project?

Tell us what you need and what stage you are at. We will get back to you to arrange a site survey or a proposal.

+34 605 660 658 info@domoticavalencia.es Valencia and metropolitan area